- Tattoo supplies
- Hygiene
- Piercing supplies
- Tattoo and piercing care
- Studio facilities
- PMU
- Coupons
- SALE
Cheyenne - Power Unit III Limited Concept Edition
The Cheyenne Power Unit III is operated completely contactless by gesture control.This means that cross-contamination while working is excluded and tattooing is raised to a new hygienic level.With the powerful magnets and the integrated clip-on stand, you have a wide range of mounting options.The position sensors ensure that the display is correctly oriented in every installation situation.The power supply unit has two USB outputs for charging additional devices.Limited to 1111 pieces worldwide, so grab it quickly.Made in GermanyTechnical specifications:Input voltage: 15 V DCOutput voltage: 4.7 - 12.5 V DC displayed as a bar graphWorking frequency: 25-160 HzOperating mode: continuous operationDimensions (W x H x D): 100 x 118 x 37 mmWeight: approx. 350 gScope of delivery:1 x Cheyenne Power Unit III Limited Concept Edition1 x power plug1 x instruction manual
Cheyenne - SOL Operating Unit
Cheyenne - SOL Operating UnitThe SOL Operating Unit will create a whole tattoo machine out of each SOL Drive Unit.You can change strokes on the fly by switching the drive units. The exchange can be made within two clicks without extra setup time as the operating unit saves the settings for each stroke.1 piece
Critical Atom Footswitch
The Atom foot switch with its simple and modern design is the perfect travel companion as it takes up little space.The housing is made of durable aluminum and is therefore very robust for daily use in the studio.With the non-slip rubber base, the Atom step switch also has a higher level of stability without slipping away.The foot switch works with a chinch cable (not included).It is compatible with other power supplies with a foot switch connection.1 piece
Critical Tattoo Atom X power supply, black
The new ATOM X from Critical Power Supplies USA Integrated magnets for firm hold Jump-start function for heavy-duty machines 6 Amp Power-Up Peak Current, 3 Amps Effective Continuous Current Override 'function. No foot pedal required Precision controlled setting 0-17vdc Integrated short circuit protection 0.1 Volume setting 2 Volt presets Duration or individual operation of the foot switchNon-volatile memory (settings remain stored even if power is taken from the power) Universal Input 110-240vac 50 / 60hz Inputs for standard 6.3mm jack clipcord and foot switch Compatible with coils and rotary machines Made in the USA 1 piece
Critical Tattoo power supply CX-1 G2
New improved version. 4 amps continuous, 6 amps peak, pedal override button, no need for a foot pedal if you run continuous mode. There are two settings, either single function, by pressing the foot pedal, the function is turnes off or the machine is turned on and off only by touching the foot pedal.digital power supply classPedal override button Pulse mode or foot switch0 - 18 V controlledprecisely in 0.1 V steps4 Amps continuous, 6 amps peakMemory for 2 machines - independent of currentSupplied with universal mounting (table and wall mounted) and operatingMade in the USA 1 piece
Critical Tattoo Wireless footswitch for ATOM X-R
Wireless Footswitch with universal receiver of Critical TattooStable foot switch in metalDiameter: 125 mmnon-slip rubber coating on the bottomMade in USAConectable with Critical Power Supplies ATOM X-R and CX XRR
Elite Fly V2 - battery pack, green
Replacement battery for the Elite Fly V2 Pen.The charging time of the battery takes about 2 to 3 hours and has a running time of about 6 - 8 hours.Technical specifications:Operating voltage: 4 - 12VBattery Capacity: 1800 mAh1 piece
Elite Premium foot switch black
High Quality foot switch in black with clearly noticeable detent.Very stable pedal switchmade very durable cable length 2.2 mslip-resistant bottomWith jack plug (phono)1 piece
EZ Easy Touch 2 Tattoo Power Supply - white
The EZ Easy Touch 2 is a compact and exceptional power supply with a new unprecedented touchscreen technology. It is suitable for tattoo machines with a voltage range of 1.5 to 17 volts. The voltage is not only displayed on the bright green LCD display, but the power supply also changes its color depending on the voltage set. Furthermore, the power supply has strong, built-in magnets on the base, with which it can be easily attached to metal surfaces. The EZ Easy Touch 2 is suitable for working with all coil and rotary machines.For all common coil and rotary machinesBrightly lit green LCD display and light buttonsConnection for foot pedalPush mode function for machines that are difficult to startTwo voltage presets7 colors to display voltageIntegrated anti-slip mat on the bottom of the power supplyBuilt-in magnets for mounting on metal surfacesCE certifiedMade in China by EZWarranty: 1 yearTechnical data:Voltage range: 1.5 - 17 VInput: 100 - 240 V, 50 to 60 Hz, 1.5 A MaxOutput: 18V - 2.36 A MaxPower connector: 5.5 mm power connectorDisplay: Green LED displaySize: 7.5 x 7.5 x 2.9 cmWeight: 110 gScope of delivery:1 x EZ Easy Touch 2 Tattoo Power Supply1x quick guide1x power cable (EU standard)
EZ Master Flat RCA Cable 1,8 m
EZ Master Flat RCA cableis a flat tangle-proof cable with high quality copper wire which increases durability.Properties:Flat cablesuper light, only 40g heavyLength: 1,8 meters Connections: RCA (1/4 "phono)straight connection3 colours available green / red / blue
EZ Portex Gen3 Tattoo Battery Pack - Camo
The Portex Gen3 battery is small, light and has a lot of power. In addition, the Power Pack has a digital display. It displays voltage, battery level and operating time, among other important information. Thanks to its lightweight and compact design, it ensures a comfortable grip and reduces hand fatigue during longer tattoo sessions.Working voltage: 5 - 12VConnection: RCALength: 67mmDiameter: 30mmWeight: 36gBattery capacity: 1100mAhCharging time: 1 hourPowerpack working time: approx. 3.5 hoursScope of delivery:1 x EZ Portex Gen3 battery pack1 x USB-C Charging Cable1 x Instructions
Foot switch square
very stable footswitch out of metalnon-slipwith phone jack connector 1 piece
InkMachines Wireless Foot Switch
WFS wireless foot switch is designed to operate the RPS-600 and TPS-500 power supply. The WFS operates by a magnetic switch and the electronics is extremely energy efficient to insure maximum life and reliability. Easy to operate from all angles. Includes long life standard CR2450 exchangable battery.The footswitch is compatible only with the RPS-600 and the TPS-500 power supply.Dimensions: 100x100x25mmWeight: 240 grams
Keeppower Li-Ion-Akku geschützt, 2 pieces
Keeppower 18500 - 2000mAh, 3,6V - 3,7V Li-Ion-Akku geschützt2 replacement batteries for Cheyenne Sol Nova Unlimited IIACUS Tattoo PenDelivered in a sturdy battery box
Kick switch mini
stable footswitch handy pocked-sizednon-slipwith phone jack connector 1 piece
Premium Slim RCA cable angled, 2.2 m
High quality and lightweight premium RCA / RCA cable for rotary and coil machines.Properties:Thin cablesuper light, only 45g heavyConnections: RCA (1/4 "phono)angled connection1 piece
Premium Slim RCA cable straight, 2.2 m
Our "light weight" premium Chinch / RCA cable for rotary and coil machines.Properties:Thin cablesuper light, only 45g heavyLength: 2.2 meters Connections: RCA (1/4 "phono)straight connection1 piece
Soft Silicon Clip Cord
superelasticwith phone jack180 cmvarious colours 1 piece
Vlad Blad Power Box 5 Pro power supply
The Power Box 5 is an absolutely powerful digital power supply from Vlad Blad. The housing is partly made of recycled aircraft aluminum.Characteristics:Reliable and durableAdjustable in 0.1 V steps, a longer press changes the voltage faster.LCD screenCompatible with coil and rotary machinesHigh-quality and super light aluminum housingStrong magnet for attachmentJump-start function for hard-starting machinesFour memory locations for liner, filler, shader, etc.Technical specifications:Output Voltage: 1.5 - 19 VRating: 8 amps peak and 5 amps continuousLength: 5.2 cmWidth: 5.2 cmHeight: 3.4 cmWeight: 103 gColor: BlackScope of delivery:1 x Vlad Blad Power Box 5 Pro Power Supply1 x Power Plug1 x instruction manual
Vlad Blad RCA Cord Air - Limited Edition
The Vlad Blad RCA Cord Air cable is a super flexible and lightweight cable. With high-quality gold-plated connectors. A very reliable cable.Chinch and 6.3 mm jackVery easy2 metresQuality connectorLimited edition1 piece